Install The Device Drivers - Yamaha CRW-F1DX Owner's Manual

Note
• The CRW-F1DX drive is required to be connected to the USB port on the
computer. The drive connected to the computer via a USB hub may not operate
properly.
• When the CRW-F1DX drive is connected to a USB 1.1-compliant port on the
computer, the drive operates with USB 1.1 specifications. (P. 13)
9

Install the Device Drivers.

Installation of the device drivers starts automatically when the CRW-F1DX
drive is connected to the computer.
The device drivers need to be installed only once when first installing the
device.
For Windows XP/2000 Professional/Me
The device drivers of the operating system standard are installed
automatically.
For Windows 98 Second Edition
Install the device drivers with the included CD-ROM "CRW-F1 SOFTWARE
DISC."
For details, refer to the separate manual "Windows 98 Second Edition USB
CD-ROM Device Driver Installation Guide" for the CRW-F1DX drive.
Note
The device drivers are required to be installed for each USB port. If the drive is
connected to a USB port where the device drivers have not yet been installed, a
message to install the device driver will be shown.
10
Check Recognition of the CRW-F1DX Drive.
After connecting the CRW-F1DX drive to the computer, follow the steps
below to check that the drive is recognized properly by the computer.
For Windows XP
1
Select Start on the task bar, then Control Panel, System, Hardware tab,
and Device Manager. The Device Manager dialog box appears.
Note
If the System icon is not shown in the Control Panel window, click Switch to
Classic View on the left side of the window.
Continued on next page
39