Connect with IEEE1394 for Windows
Note
Place the CRW-F1DX drive horizontally.
1
Remove all additional IEEE1394 devices connected to the
computer, and turn on the computer.
2
Be sure that the power switch of the CRW-F1DX drive is
turned off (STANDBY).
3
Set the 1394/USB selector of the CRW-F1DX drive to
IEEE1394.
Note
Be sure to set the 1394/USB selector while the power switch of the CRW-F1DX is
turned off (STANDBY). Interface cannot be switched if the power switch is on.
29