This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. When connecting this product to accessories and/or another product use only high quality shielded cables.
Otherwise, there is an increased risk of electrical shock, fire, or damage to the device. Return the device immediately to the store where it was purchased, or alternatively, to the nearest Yamaha dealer (listed at the back of this manual).
Remove dust and dirt from the AC power plug regularly, especially the blades. Otherwise, dust can build up on the surface of the plug, increasing the risk of fire or insulation failure due to humidity. When disconnecting, do not pull on the cord itself. Do not let objects rest on or roll over the cord.
Yamaha dealer (listed at the back of this manual). The device should be serviced about once a year. Do not touch the power plug of the AC adapter to any metal.
About CD-R/RW discs Precautions for Transportation Copyrights WARRANTY...
Features of the Drive High speed writing/reading SafeBurn™ (Enhanced write stability technology) Generous 8MB of buffer memory Buffer Underrun Protection Optimum Write Speed Control Reliable writing Yamaha’s proprietary Pure-Phase Laser System (patent applied for) Running OPC (Optimum Power Control) High-fidelity digital audio...
Setup Procedures Setup Flowchart Set up the STEP ( P. 12 – 17) 1. SCSI settings ( P. 12, 13) 2. Connecting the 3. Connecting the AC adapter ( P. 16, 17) Configuring for the operating system STEP ( P. 18 – 20) Check that the correctly.
Setup Procedures Set Up the Drive SCSI Settings Rear panel Dip switches SCSI ID Number...
Notes Termination Hard disk drive (unterminated) (terminated) Termination ON (Default) Set to ON if the drive is the last device on the SCSI chain Note Setup Procedures Computer SCSI card (terminated) Termination OFF Set to OFF if the drive is not the last device on the SCSI chain...
Troubleshooting The drive does not turn on. The computer does not start up. drive is not recognized. Note...
Troubleshooting The disc tray does not open.
Troubleshooting The disc keeps being ejected. The drive does not operate correctly.
Troubleshooting The drive ejects or fails to read the disc, or the LED on the front panel remains lit in orange after the disc has been loaded (meaning that the disc has not been recognized). ( P. 31) No sound of CD-DA (audio CD) disc is audible.
Troubleshooting The “Buffer Underrun” error message is displayed. Note...
Appendix About the Firmware Determining the Firmware Version of the For Windows 95/98/98 Second Edition/Me SCSI ID number For Windows NT For Windows 2000 Professional Drive The firmware revision indicated here varies depending on the software version of the drive.
Appendix Macintosh Users LED Indicator Messages...
Bei weiteren Fragen wenden Sie sich Sitte an Ihren Händler oder eine der folgenden Firmen. Pour plus de détails sur les produits, veuillez vous adresser à Yamaha ou au distributeur le plus proche figurant dans la liste suivante : Si tiene alguna pregunta, por favor póngase en contacto con su distribuidor o una de...