Install The Device Drivers; Check Recognition Of The Crw3200Ux Drive - Yamaha CRW3200UX Series Owner's Manual

External usb 2.0/1.1 cd-r/rw drive

Hide thumbs Also See for CRW3200UX Series:

Table of Contents

Preparing the CRW3200UX Drive

Note

• The CRW3200UX drive needs to be connected to the USB port on the

computer. The drive connected to the computer via a USB hub may not

operate properly.

• When the CRW3200UX drive is connected to a USB 1.1-compliant port on

the computer, the drive operates with USB 1.1 specifications. (P. 9)

2 Install the Device Drivers

Installation of the device drivers starts automatically when the CRW3200UX

drive is connected to the computer.

The device drivers need to be installed only once when first installing the

device.

For Windows 98 Second Edition

Install the included device drivers.

For details, refer to the separate manual "Device Driver Installation Guide" that

comes with the CRW3200UX.

For Windows Me/2000 Professional/XP

The device drivers of the operating system standard are installed automatically.

Note

The device drivers are installed for each USB port. If you connect the drive to a USB

port where the device drivers have not yet been installed, a message to install the

device driver will be shown.

After connecting the CRW3200UX drive to the computer, follow the steps

below to check that the drive is recognized properly by the computer.

For Windows 98 Second Edition/Me

Select Start on the task bar, then Settings, Control Panel, System, and

Device Manager tab. The Device Manager dialog box appears.

Note

For Windows Me, if the System icon is not found in the Control Panel window,

click view all Control Panel options on the left side of the window.

Table of Contents