Yamaha CRW-F1DX Owner's Manual page 30

Cd-r/rw

Table of Contents

Preparing the CRW-F1DX Drive (Macintosh – FireWire)

Note

• In the case that other FireWire storage devices such as a hard drive or an MO

drive are connected to the computer, "fw609e" and "sbp609e" are shown in the

column when any device is recognized. To check that the CRW-F1DX drive is

recognized properly, un-mount icons of those devices, and then remove those

devices temporarily.

• If the "FireWire" item is not shown, the FireWire interface of the computer is

not recognized by the Mac OS. Contact the manufacturer of the computer.

• If the "fw609e" and "sbp609e" (or "CRW-F1E" in some versions) are not

shown even with the "FireWire" item shown, the CRW-F1DX drive is not

recognized by the Mac OS. In such a case, contact the store of purchase or your

nearest Yamaha dealer (listed at the back of this manual).

• The FireWire version in Mac OS that supports the CRW-F1DX drive is 2.0 or

later.

• The extension files that support the CRW-F1DX drive are required to mount

and read the disc even if the drive is recognized by Apple System Profiler. The

extension files come with the CD writing software. For details, refer to the

instruction for the CD writing software.

For Mac OS X

Select Go in the menu bar, then Applications, Utilities, Apple System

Profiler, and Device and Volume tab.

Table of Contents