Hot Spring ® Water Treatment Guide - HotSpring Landmark Owner's Manual

Sodium Dichlor (chlorine) is the only recommended sanitizer that will work in conjunction with all of the other products in this system.
FreshWater ® III high output ozone system uses corona discharge technology to produce a high concentration of ozone which is injected into the
spa water.
Monopersulfate (MPS) is an oxidizing chemical used to prevent the buildup of contaminants, maximize sanitizer efficiency, minimize combined
chlorine and improve water clarity.
FreshWater ® Silver Ion Purifier introduces silver ions into the spa water, inhibiting bacteria growth. When combined with MPS or chlorine,
Ag +
oxidizes particulates in the spa water.
It is important to follow the recommended application and maintenance programs outlined for each product's use.
If the spa is being used over an extended period of time, such as a whole afternoon or evening, additional sanitizer will be needed.
A weekly "shock treatment" is required.
The shock treatment quickly destroys any remaining contaminants while revitalizing the silver ion cartridge, allowing the silver ions to continue to
be released into the water. Without this weekly shock treatment, the silver ion cartridge may stop releasing silver ions into the water.
To weekly "shock treat" your spa you may use either MPS or sodium dichlor. It will require much less sodium dichlor to administer the shock
treatment than MPS (1 teaspoon of sodium dichlor has oxidizing capabilities comparable to 2 tablespoons of MPS). Sodium dichlor may be a
more appropriate weekly shock for those users that experience heavy bather load conditions.
IMPORTANT NOTE: MPS is an oxidizer, not a sanitizer.
At spa Follow Start-Up and Refill Procedures section
NOTE: Use the FreshStart
startup
spa to remove unwanted contaminants.
or refill
Prior to Add one-half (1/2) teaspoon of chlorine per
250 gallons
each use
Landmark
(Test before adding
Grandee
any chemicals; do not
Vanguard
add any chemicals if
Sovereign
proper or higher levels
Prodigy
are found.)
Jetsetter
Once a Add one and one half (1-1/2) teaspoons of
chlorine per 250 gallons
week
Landmark
Grandee
Vanguard
Sovereign
Prodigy
Jetsetter
Every four Drain and refill your spa.
Replace the FreshWater
months
NOTE: Use the FreshStart
the spa to remove unwanted contaminants.
As needed, Add one and one half (1-1/2) teaspoons of chlorine
per 250 gallons
if water is
Landmark
hazy,
Grandee
Vanguard
cloudy or
Sovereign
has an odor
Prodigy
Jetsetter
*MPS is an oxidizer, not a sanitizer.
Water Quality and Maintenance
HOT SPRING ® WATER TREATMENT GUIDE
™
pre-filter when filling the
10,000
®
(Model S) 1 teaspoon
®
(Model G) 1 teaspoon
™
(Model V) 3/4 teaspoon
®
(Model I) 3/4 teaspoon
®
(Model H) 2/3 teaspoon
®
(Model J) 1/2 teaspoon
®
(Model S) 3 teaspoons
®
(Model G) 3 teaspoons
™
(Model V) 2-1/4 teaspoons
®
(Model I) 2-1/4 teaspoons
®
(Model H) 2 teaspoons
®
(Model J) 1-1/2 teaspoons
silver ion purifier
Ag + ®
™
pre-filter when filling
10,000
®
(Model S) 3 teaspoons
®
(Model G) 3 teaspoons
™
(Model V) 2-1/4 teaspoons
®
(Model I) 2-1/4 teaspoons
®
(Model H) 2 teaspoons
®
(Model J) 1-1/2 teaspoons
Add one (1) tablespoon of monopersulfate
OR
(MPS)* per 250 gallons
Landmark
Grandee
Vanguard
Sovereign
Prodigy
Jetsetter
Add three (3) tablespoons of monopersulfate
(MPS)* per 250 gallons
OR
Landmark
Grandee
Vanguard
Sovereign
Prodigy
Jetsetter
Page 46
®
(Model S) 2 tablespoons
®
(Model G) 2 tablespoons
™
(Model V) 1-1/2 tablespoons
®
(Model I) 1-1/2 tablespoons
®
(Model H) 1-1/4 tablespoons
®
(Model J) 1 tablespoon
®
(Model S) 6 tablespoons
®
(Model G) 6 tablespoons
™
(Model V) 4-1/2 tablespoons
®
(Model I) 4-1/2 tablespoons
®
(Model H) 4 tablespoons
®
(Model J) 2-1/2 tablespoons