Hot Spot Water Treatment Guide - HotSpring HOT SPOT Tempo Owner's Manual

Table of Contents

Advertisement

At spa startup or refill
Prior to each use
(Test before adding any chemicals; do not
add any chemicals if proper or higher levels
are found.)
Once a week
Every four months
As needed
(if water is hazy, cloudy or has an odor)
SILVER IONS QUESTIONS AND ANSWERS
Question: How are the silver ions actually added to the water?
Answer: The silver ion cartridge contains ceramic beads that are infused with silver. By placing the cartridge in the circulation pump filter standpipe,
it is subjected to the continuous flow of water created by the pump's 24 hour circulation. The flowing water, through a chemical erosion process,
carries with it the silver ions necessary to add a sanitizing residual to the spa water.
Question: What happens if I do not add the weekly shock treatment?
Answer: The contaminants in the water may coat the silver ion cartridge's ceramic beads, blocking the silver ions' release into the water. When this
occurs, there will be no residual of silver ions present in the water, eliminating them from the sanitizing process.
Question: How often should the FRESHWATER
Answer: The cartridge must be replaced every four months. Please refer to the instructions provided with each FRESHWATER
cartridge.
Question: Can I use the FRESHWATER III ozone system in addition to the silver ion system?
Answer: Yes. In fact, it is preferred! The use of the FRESHWATER III ozone system will enhance the performance of the silver ions and may
substantially reduce the need for supplemental chemical treatments when the spa is not in use.
Question: Why can't I use bromine or biguanides instead of MPS or chlorine?
Answer: Bromine and biguanides will chemically react with the sanitizing action of the silver ions. This will eliminate their beneficial sanitizing effect.
DOS AND DON'TS
• DO check your MPS or dichlor chemical level prior to each use.
• DO shock the spa weekly (use either MPS or sodium dichlor).
• DO change the FRESHWATER
• DO test Total Alkalinity and pH weekly.
Water Quality and Maintenance

HOT SPOT WATER TREATMENT GUIDE

Follow Start-Up and Refill Procedures section
Add one-half (½) teaspoon of chlorine per
250-gallons (950 liters)
TEMPO
RELAY
RHYTHM ¾ teaspoon
SX
TX
Add one and one-half (1½) teaspoons of
chlorine per 250-gallons (950 liters).
TEMPO
RELAY
RHYTHM 2¼ teaspoons
SX
TX
Drain spa, repace cartridge (fi applicable), and refill your spa. Follow spa Start-Up and Refill
Procedures
Add one and one half (1 ½) teaspoons of sodium dichlor per 250-gallons (950 liters).
TEMPO
RELAY
RHYTHM
SX
TX
silver ion purifier cartridge be replaced?
Ag +
silver ion purifier every four months.
Ag +
¾ teaspoon
¾ teaspoon
⅔ teaspoon
¼ teaspoon
2¼ teaspoons
2¼ teaspoons
1 ¾ teaspoons
¾ teaspoon
2¼ teaspoons
2 ¼ teaspoons
2 ¼ teaspoons
1 ¾ teaspoons
¾ teaspoon
Page 37
Add one (1) tablespoon of monopersulfate
(MPS)* per 250-gallons (950 liters).
TEMPO
1½ tablespoons
RELAY
1 ½ tablespoons
OR
RHYTHM 1 ½ tablespoons
SX
1 ¼ tablespoons
TX
½ tablespoon
Add three (4) tablespoons of monopersulfate
(MPS)* per 250-gallons (950 liters).
TEMPO
4 ½ tablespoons
RELAY
4 ½ tablespoons
OR
RHYTHM
4 ½ tablespoons
SX
3 ¾ tablespoons
TX
1 ½ tablespoon
silver ion purifier
Ag +

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hot spot txHot spot rhythmHot spot relayHot spot sx

Table of Contents