KVH Industries TracPhone FB150 User Manual page 89

The page is updated as shown.
To be able to access the terminal with a IP handset again you must click New
and enter the password. Note that the IP handset only supports numbers (no
letters) in the password.
Remember to set up the IP handset to use the same password.
5. Select Configure next to the handset to access the built-in web interface of the IP
handset.
Note
The web interface of the IP handset opens. It is very similar to the web interface
of the terminal, but has a handset icon in the top left corner.
With the web interface of the IP handset you can access the internal settings of
the IP handset. For further information, refer to the user manual for the IP
handset.
Setting up the IP handset to match the terminal
In the IP handset, use the display menu system to enter the user name (Number in
the web interface) and the password you just entered in the web interface. Do as
follows:
1. In the IP handset, select Menu and then SIP to get the list of profiles.
2. Select the BGAN profile and select Options (left softkey).
3. Select Edit/View and set the user name and password to the same as in the
terminal's web interface.
Note that the user name is also the local number for the handset.
The Configure link is only available if the handset and terminal are set
up to recognize each other, and the handset is connected to the terminal.
For further information, see below: Setting up the IP handset to match the
terminal.
Setting up the interfaces
Chapter 4: Using the web interface
80