KVH Industries TracPhone FB150 User Manual page 79

4. Restart the terminal for the setting to take effect.
For information on how to establish a connection with PPPoE, see Using PPPoE
(Point-to-Point Protocol over Ethernet) on page 32.
Configuring the Phone interface
To enable/disable incoming calls on the Phone interface do as follows:
1. Select SETTINGS > Phone from the left navigation pane.
2. Select Standard if you want to be able to receive calls through the Phone
interface.
Only calls with Standard call type are accepted.
If you clear the box you cannot receive calls through the Phone interface, but you
can still use the Phone interface to make calls from the terminal.
3. Click Apply.
Setting up the interfaces
Chapter 4: Using the web interface
70