KVH Industries TracPhone FB150 User Manual page 45

Accessing and navigating the web interface
Accessing the web interface
To access the web interface, do as follows:
1. Connect your computer to the terminal.
2. Start up the terminal.
For details, see Getting started on page 10.
3. Open your browser and enter http://ut.bgan or the IP address of the terminal in
the address bar.
If your connected computer is set up to obtain a DNS server address
automatically, this name is translated into the local IP address of the terminal.
The default IP address of the terminal is http://192.168.0.1.
If the IP address is changed and you do not have the new address, you can
Note
temporarily set the IP address to the default value by pressing the Reset
button next to the SIM slot in the connector panel of the terminal. You can
then access the web interface and change the IP address.
Note that if you do not change the IP address, the default IP address will
only be valid until the terminal is powered off. Then the terminal returns to
the IP address from before the Reset button was pressed.
For further information on the Reset button, see Reset button on page 120.
Changing the language
When you have access to the web interface, if you want to display a different
language than English, select SETTINGS > LANGUAGE from the left menu, select
a language from the list and click Apply. For further information, see Selecting the
language on page 90.
Chapter 4: Using the web interface
Introduction 36