KVH Industries TracPhone FB150 User Manual page 69

Setting up the Default network user group
The Default network user group provides a shared Standard connection to the
Internet using the built-in router functionality of the terminal.
If you want to apply other settings to the Default network user group, do as follows:
1. Select SETTINGS > LAN > Network user groups.
2. When you are prompted, enter the administrator user name and password.
The default user name is admin and the default password is 1234.
3. Click Edit next to the Default user group.
4. Select the type of Internet connection.
Note
The Default group cannot be set to Bridge mode. If you want to use
Bridge mode you must use Group 0 (see the previous section).
Setting up the interfaces
Chapter 4: Using the web interface
60