KVH Industries TracPhone FB150 User Manual page 60

Sending an SMS message to the terminal
You can send an SMS message to the terminal e.g. from a mobile phone, using the
mobile number for the terminal. Dial
+ <Mobile number>
The first part of the mobile number is always 870, which is the "country code" for
the BGAN system. If the mobile number is listed in the web interface, you can look it
up as follows:
Select PHONE BOOK > Mobile numbers. If the mobile number is not listed in the
web interface, refer to the documents provided with your airtime subscription.
Receiving a message
If a message has arrived, the icon bar at the top of the web interface shows an
unopened envelope. Click the envelope to see the new message(s).
Otherwise, to see new messages click MESSAGES from the left navigation pane.
The page shows new incoming messages.
The terminal does not accept more than 100 incoming messages (including
Note
read and unread messages). If you have received 100 messages, you have to
delete some of them in order to free space for new messages. Otherwise, the
new messages are rejected.
If the message is not an SMS message but information of voice mail, call your Voice
mail service number to hear the Voice mail. The Voice mail service number is
normally listed in the SMS message.
You may also find the Voice mail service number under MESSAGES > Message
settings. Note that the voice mail number is only shown here if it is available on the
SIM card. Otherwise, refer to the information included with your Airtime
subscription.
Handling SMS messages
Chapter 4: Using the web interface
51