KVH Industries TracPhone FB150 User Manual page 71

10. At Automatic activation select whether the connection should be activated
automatically or manually.
• Disabled means you can activate/deactivate the connection from the
Dashboard. This setting is used by default for the Default user group.
• Enabled means the connection is activated automatically as soon as the system
is ready.
11. Click Apply.
12. Reboot the terminal for the changes to take effect.
Setting up a Bridge mode connection
To set up a Bridge mode connection, do as follows:
1. Select SETTINGS > LAN > Network user groups.
2. When you are prompted, enter the administrator user name and password.
The default user name is admin and the default password is 1234.
Setting up the interfaces
Chapter 4: Using the web interface
62