KVH Industries TracPhone FB150 User Manual page 72

3. Click Edit next to Group 0.
If you want, you can change the name of the group to something more
meaningful, e.g. to "Bridge mode".
4. At Status, select Enabled.
5. Select Dynamic IP address.
This is the IP address used externally on the satellite network. Refer to the next
step for Static IP.
6. If you want to use a static IP address, you must have it included in your airtime
subscription and use that address as follows:
• Leave the setting in step 5. at Dynamic, do not select Static IP.
• Select SIM default in step 8.
• Type in the APN user name and password from your provider in step 9.
Setting up the interfaces
Chapter 4: Using the web interface
63