Understanding the Configuration Commands
Use the following configuration command descriptions to understand
the parameters you are setting with the ZSim program.
Allow Reverse
Purpose:
Default:
Calibrate
Purpose:
Change Caret
Purpose:
Default:
Change Delimiter
Purpose:
Default:
Change Tilde
Purpose:
Default:
Change Y-pos
Purpose:
Clear Permanent
Purpose:
Default Start Adjust
Purpose:
Allows reverse printing on the label, both for the
entire label (^LR) and for specific fields (^FR).
On
Measures the label length and calibrates the sensors.
Changes the format instruction prefix to another
ASCII character.
^ (ASCII 94)
Changes the ZPL delimiter character.
, (ASCII 44)
Changes the command instruction prefix to another
ASCII character.
~ (ASCII 126)
Skid compensation for long labels. All fields will
move the specified percentage from their absolute
position. Interval: -5.0% to +5.0%. Keys: F2 =
decrease value of Y-position, F3= increase value.
Causes all formats and images stored in the printer's
permanent memory to be erased.
Moves the origin back or forward from the edge of
the label by [dots] before printing starts. This value
can be either positive or negative.
A positive start adjustment means that the specified
ZSim v5.XX User's Guide