Configuration Commands; Allow Reverse; Calibrate; Change Caret - Intermec EasyCoder PD41 Programmer's Manual

Configuration Commands

The following summaries describe each configuration command
and list valid ranges and default values where applicable.

Allow Reverse

Purpose:
Default:

Calibrate

Purpose:

Change Caret

Purpose:
Default:

Change Delimiter

Purpose:
Default:

Change Tilde

Purpose:
Default:

Change Y-pos

Purpose:
ZSim Programmer's Guide
Allows reverse printing (black background with
white letters) on the label, either for the entire
label (^LR) or for specific fields (^FR).
On
Measures the label length and calibrates the
sensors.
Changes the format instruction prefix to
another ASCII character.
^ (ASCII 94)
Changes the ZPL delimiter character.
, (ASCII 44)
Changes the command instruction prefix from
the tilde to another ASCII character.
~ (ASCII 126)
Skid compensation for long labels. All fields will
move the specified percentage from their
absolute position. Interval value is -5.0% to
+5.0%.
25