Honda HRC7018 Owner's Manual page 87

Pulls to one side
Tires should be correctly inflated (page 57).
The control linkages must be correctly adjusted (page 52).
Both pump bypass valves must be closed (page 24).
Vibrates
Blades should be in good condition (page 62).
The deck must be free of any accumulation of clippings.
Deck and blade belts should be in good condition and at
correct tension (page 66).
cuts poorly
Throttle should be in FAST.
Cutting height must be at the same setting at front and rear
(page
58).
Blades should be in good condition (page 62).
Mower deck should be free of grass accumulation.
Deck and blade belts should be in good condition and at
correct tension (page 66).
Tall grass should be cut at lower speeds and/or higher
cutting heights.
79