Check The Mower - Honda HRC7018 Owner's Manual

BEFORE MOWING
-
Check the Mower
For your safety and the service life of your equipment,
always inspect your mower before using it. Before beginning
your pre-operation check, be sure:
l
The mower is parked on a level surface.
l
The blade control lever is disengaged and the ground
speed control levers are in NEUTRAL.
l
The ignition switch is off and the key is removed.
Walk around the mower and check its general condition,
Look around and underneath it for signs of fluid leaks.
Remove any excessive dirt and debris, especially around
moving components. Look for signs of damage. Check nuts,
bolts, screws, and pins for tightness.
Never operate the mower with the safety interlock system
inoperative. Do not attempt to bypass or defeat the system.
Keep all shields and covers in place while operating the
mower. If you find any problems or defects, have them
repaired before mowing.
Blades
Before each use, check each mower blade for damage or
abnormal wear. See page 62 for details.
Be'lts
Check the blade, deck, and pump belts for wear and correct
tension. See page 66 for details.
Engine Oil
Check the level on the dipstick. Running the engine with a
low oil level will cause engine damage. See page 41 for
details.
Hydrostatic Oil
Check the oil level in the reservoir. See page 49 for details.
Fuel
Remove the cap on the tank and check the fuel level, See
page 38 for refueling details.
20