Install The Processor - Intel R1000RP Series Quick Installation

General Installation Process
5

Install the Processor

Cautions:
When removing the protective
cover, DO NOT TOUCH the
A
gold socket pins.
To avoid damage, DO NOT
DROP the cover onto the
B
socket pins or components.
When unpacking a processor,
hold by the edges only to avoid
C
touching the gold contact pins.
Install the Processor ... continued
D. Install the Processor
CAUTION: The underside of the processor has components
that may damage the socket wires if installed improperly.
Processor must align correctly with the socket opening
before installation.
DO NOT DROP processor into socket!
A
Orient the processor with the socket so that the processor
cutouts match the two
socket pins.
B
Note location
of gold key at
corner of
processor.
B
Install the Processor ... continued
F. Engage the Load Plate
A
Make sure the front edge of the load plate
slides under the shoulder
screw as the lever is
lowered.
A
Shoulder
Screw
Load Plate
Front Edge
A. Open the Socket Lever
A
Components
A
G. Latch the Locking Lever
A
Push down on the locking lever.
CAUTION: DO NOT damage the
server board with the tip of the
locking lever.
B
Slide the tip
of the lever
under the
notch in the
load plate.
B
Close the load
Make sure
plate locking
the lever is securely latched.
lever.
Push the lever
A
handle
down
and away
from the socket
to release it.
B
Rotate the lever
open all the way.
E. Close the Load Plate
Carefully lower the load plate
over the processor.
A
3
B. Open the
Load Plate
Open the load
plate as shown.
C. Unpack the Processor
Carefully remove
protective cover
as shown.
Save the
protective
cover.
Carefully lower the load plate
over the processor.
H. Remove the Cover
Carefully lift the cover
straight up as shown.
A A
B
Save the
protective
cover.