Access Control - D-Link DAP-1360 User Manual

Section 3 - Configuration
Use MAC Filters to allow or deny wireless clients, by their MAC addresses, from accessing the DAP-1360. You can manually add a MAC
address or select the MAC address from the list of clients that are currently connected to the AP (Connected PCs). The default setting is
Disable MAC Filters.

Access Control:

Access control is set to Disable by default.
Select Reject to deny access to the AP. Select
Accept to allow access to the AP.
Enter the MAC address of the client that you
MAC Address:
want to allow or deny access to the AP.
Select the MAC address of a computer from
Connected PCs:
the drop-down menu and click Clone to fill in
the MAC Address field with that computer.
MAC Filter List:
This list will display the MAC addresses that
are in the selected filter.
D-Link DAP-1360 User Manual
Access Control
59