Configuration; Web-Based Configuration Utility - D-Link DAP-1360 User Manual

Section 3 - Configuration
If you wish to change the default settings or optimize the performance of the DAP-1360, you may use the configuration
utility that D-Link has included a configuration utility for this purpose.
After you have completed the initial installation, you can access the configuration menu, at any time, by opening the
web-browser and typing in the device name of the DAP-1360. The DAP-1360's default device name is shown below:
1. Open the web browser
2. Type in the device
name (dlinkap) or ip
address (192.168.0.50)
of the DAP-1360.
Note: If you have changed the default device name assigned to the DAP-1360, make sure to enter the correct device name.
3. Type admin in the User Name
field
4. Leave the Password blank
5. Click OK
D-Link DAP-1360 User Manual

Configuration

Web-based Configuration Utility

18