Wireless Client - D-Link DAP-1360 User Manual

Section 3 - Configuration
In the Wireless Client mode, the DAP-1360 acts as a wireless network adapter for your Ethernet-enabled device (such as a game console
or a TV set-top box).
Enable Wireless:
Select this to turn the Wi-Fi module on and off. Use the drop-down
box to select if you want to use a schedule. Click Add New to add
or change a schedule.
Wireless Type: Select Infrastructure if you only connect your DAP-1360 to other
wireless clients (as such wireless PCs). Select Ad-Hoc if you
connect your DAP-1360 to another DAP-1360 operating in the Ad-
Hoc mode.
Wireless Network
You can input the wireless network name of the root AP or click the
Name (also called Site Survey button to find the root AP.
the SSID):
Site Survey:
Click this button to choose the root AP from an available connection
list.
Wireless Channel:
The channel used will be displayed.
The channel will follow the root AP.
802.11 Mode: Select the appropriate 802.11 mode based on the wireless clients
in your network. The drop-down menu options are 802.11g
Only, Mixed 802.11b/g, 802.11b Only, 802.11n Only, or Mixed
802.11b/g/n.
Channel Width: Select the appropriate channel width between 20MHz or Auto
20/40MHz from the pull-down menu.
Transmission Rate:
Select the transmission rate. It is strongly suggested to use the
Auto setting for optimal performance.
Wireless MAC
If you disable this option, your DAP-1360 will fill the source MAC
Clone :
address field of all packets that it forwards with its own MAC address. If you enable this option, manually type in a different
scource MAC address for the DAP-1360 to use in all packets that it forwards.
Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See P.75, Wireless Security, of this manual
Mode:
for a detailed explanation of the wireless security options.
Wi-Fi Protected
Select enable if you want to configure 1360 with WPS.
Setup:
D-Link DAP-1360 User Manual

Wireless Client

48