Advanced Network - D-Link DAP-1360 User Manual

Section 3 - Configuration
This function is available if the DAP-1360 is in WISP Client Router or WISP Repeater mode. This feature allows you to change the LAN
settings. Please be aware that any changes to the factory default settings may affect the behavior of your network.
Enable UPnP: Check this box to use the Universal Plug
and Play (UPnP™) feature. UPnP provides
compatibility with networking equipment,
software and peripherals.
Enable WAN Check this box to allow the WAN port of the
Ping Respond: DAP-1360 to be pinged. Unchecking the box
will not allow the DAP-1360 to respond to
pings. Blocking ping response may provide
some extra security from intruders.
Remote
Remote management allows the DAP-1360
Management:
to be configured from the Internet by a web
browser. A username and password are still
required to access the Web-Management
interface. In general, only a member of your
network can browse the built-in web pages
to perform Administrator tasks. This feature
enables you to perform Administrator tasks
from the remote (Internet) host.
D-Link DAP-1360 User Manual

Advanced Network

65