Lan Settings - D-Link DAP-1360 User Manual

Section 3 - Configuration
The DAP-1360 is set to Static IP by default.
My LAN
Select this option if you do not have a DHCP
Connection is:
server on your network, or if you wish to assign
a static IP address to the DAP-1360.
Select this option if you are manually assigning
Static IP:
an IP Address.
Select this option if you would like to have an
Dynamic IP:
IP Address automatically assigned to the DAP-
1360 by a DHCP server in your network.
IP Address:
Enter the IP address of the access point.
Enter the subnet mask of your access point.
Subnet Mask:
Gateway address:
Enter the IP Address of the router in your network.
Device This allows you to configure this device more
Name(NetBIOS easily when your network using TCP/IP protocol.
Name): You can enter the device name of the AP into
your web browser to access the instead of ip
address for configuration.If you are using the device name to connect, ensure that your PC and your DAP-1360 are on
the same network.
Select this to enable the DHCP server if static IP address is selected.
Enable DHCP
Server:
DHCP IP Address Enter the starting and ending IP addresses for the DHCP server's IP assignment.
Range Lease Time: Enter the length of time for the IP address lease.
D-Link DAP-1360 User Manual

LAN Settings

57