Configure Wpa-Eap, Wpa2-Eap, And Wpa2-Auto-Eap (Enterprise) - D-Link DAP-1360 User Manual

Section 4 - Security
Configure WPA-EAP, WPA2-EAP, and
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please
establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption
due to the added overhead.
1. Log into the web-based configuration utility by opening a web browser and entering the device name of the access
point (dlinkap). Click on Wireless Setup on the
left side.
2. Next to Security Mode, select Enable WPA
Wireless Security, Enable
WPA2 Wireless Security, or Enable
WPA2-Auto Wireless Security.
3. Next to Cipher Mode, select
TKIP, AES, or Auto.
4. Next to Personal / Enterprise,
select Enterprise.
5. Next to RADIUS Server enter the IP Address of
your RADIUS server.
6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port.
7. Next to Shared Secret, enter the security key.
8. Click Save Settings to save your settings.
D-Link DAP-1360 User Manual
WPA2-Auto-EAP (Enterprise)
79