Static Ip - D-Link DAP-1360 User Manual

Section 3 - Configuration
Select Static IP if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway
address, and DNS address(es) provided to you by your ISP.
IP Address:
192.168.1.1 is the default WAN IP Address
of the DAP-1360.
Subnet Mask:
255.255.255.0 is the default subnet mask.
All devices on the network must have the
same subnet mask to communicate on the
network.
Default Gateway: Enter the IP Address of the gateway
in your network. The default setting is
192.168.1.254.
MTU Size:
Y o u m a y n e e d t o c h a n g e t h e M T U
(Maximum Transmission Unit) for optimal
performance with your specific ISP. The
default MTU size is 1500.
Primary/ Secondary Enter the Primary and Secondary DNS (Domain Name System) server IP address assigned by your ISP.
DNS Server:
Secondary DNS
This is optional.
Server:
Clone MAC address: The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your
PC's MAC Address button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not
recommended that you change the default MAC address unless required by your ISP.
D-Link DAP-1360 User Manual

Static IP

53