Access Control List Commands - D-Link DAP-2695 Command Line Interface Reference Manual

Get Command:
get acl
get acl-table
get macaddrlist
get ethlink
get trafficmgr
get e_partition
get w_partition
get acctstate
get acctip
get acctport
get backup-acctip
get backup-acctport
get backup-radiusip
get backup-radiusport
get radiuscli_auth_status
get radiusclient
get radiuscli_user
get radiuscli_pass
get radiuscli_ser_ip
get radiuscli_ser_pass
802.11 b/g /n Access Point Command Line Interface Manual
Function
Display Access Control Setting of Enabled or disabled
Display macfilter table
Display MAC Address List
Display ethernet integration
Display Traffic Manager status
Display e_partition
Display w_partition
Display Accounting state
Display Accounting server IP address
Display Accounting port number
Display Backup Accounting server IP address
Display Backup Accounting port number
Display Backup RADIUS server IP address
Display Backup RADIUS port number
Display RADIUSClient Auth status
Display RADIUS Client status
Display RADIUS Client User name
Display RADIUS Client User password
Display RADIUSClinet's Server ip
Display RADIUSClient's Server password

ACCESS CONTROL LIST COMMANDS

get acl
get acl-table
get macaddrlist
get ethlink
get trafficmgr status
get e_partition
get w_partition
get acctstate
get acctip
get acctport
get backup-acctip
get backup-acctport
get backup-radiusip
get backup-radiusport
get radiuscli_auth_status
get radiusclient
get radiuscli_user
get radiuscli_pass
get radiuscli_ser_ip
get radiuscli_ser_pass
25
9
Syntax