Ipv4; Static Ip - D-Link DAP-1665 User Manual

Section 3 - Configuration
Connection
Select Static IP to manually assign an IP address to the
Type:
DAP-1665.
LAN IP Address:
Enter the IPv4 address that you want to assign to the network
AP. This address should be outside of the uplink router's DHCP
address pool.
Subnet Mask:
Enter the subnet mask.
Gateway
Enter the gateway address. This is usually the IP address of the
Address:
uplink router.
Primary DNS
Enter the address of the primary DNS server.
Server:
Secondary DNS
Enter the address of the secondary DNS server. This is optional
Server:
but will provide backup if the primary server fails.
Management
Enter a custom URL link to access this management interface.
Link:
D-Link DAP-1665 User Manual

IPv4

Static IP

63