Power Trim/Tilt Switch - Honda Outboard Motor BFl15A Owner's Manual

3. CONTROLS (SIDE-MOUNT TYPE)
Power Ikimmilt Switch
Power Trim
Press the power trim/tilt switch on the
remote control to adjust the
motor trim angle from 0' to 2O'to
maintain proper boat trim. The power
trim/tilt switch located on the remote
control lever can be operated while the
boat is under way or while stopped.
By using the power trim/tilt switch,
the operator can change the trim angle
of the motor to achieve maximum
boat acceleration, speed, stability and
maintain optimum fuel consumption.
ANGLE
Power Tilt
Press the power trim/tilt swich on the
remote control lever to adjust the
motor tilt angle from 20" to 72".
By using the power trim/tilt switch,
the operator can change the tilt angle
of the motor for shallow water opera-
tion, beaching, launching from a
trailer, or mooring.
(NOTICE1
Excessive trim/tilt angle during
operation can cause the propeller
to raise out of the water and cause
propeller ventilation and engine
over-revving. Excessive trim/tilt
angle can also damage the water
pump.
19