Fuel Hose; Stem Bracket; Tool Kit; Anodes - Honda Outboard Motor BFl15A Owner's Manual

4. PRE-OPERATION CHECKS
2. After the adjustment. tighten the
bolts securely and install the engine
cover.
Reinspect the clearance and readjust
if necessary.
Other Checks
//dzJ
1
Check the following items:
1. The fuel hose for kinking, collaps-
ing or loose connections.
2. The stem bracket for damage and
mounting bolts for proper torque.
3. The tool kit contents. Compare your
tool kit contents against the tool kit
illustration above. Replace any
missing items.
4. The anodes for damage, looseness
or excessive corrosion.
The anodes help to protect the out-
board mot& from corrosion any time
they are exposed directly to the water.
3 Tool Kit
UOS WRENCH
s mm WRENCH
PLIKRS
r _
xl &- 0 >
FLAT SCREWDRIVER
SCREWDRIVER
e
A HANDLE
PHII.I.IFS
SCREWI)RIVER L " 9
--
SPARK PLUG WRESCH
OIL CHECK
SCREWDRIY~R
Replace anodes when they are visibly
reduced in size or crumble easily.
m Painting or coating the
anodes will lead to rust and corro-
sion damage to the outboard motor.
The following materials should be
kept with the boat:
I. Owner's Manual.
2. Tool
Kit.
3. Spare emergency stop switch clip,
engine oil, spark plugs, propeller,
propeller nut, washer and cotter pin.
4. Required information regarding
boating laws and regulations.
47