8. TRANSPORTING
Before transporting the outboard motor,
close the fuel cap vent knob (refer to page
37) and disconnect the fuel coupling from
the outboard motor (refer to page 49).
Trailering
When trailering or transporting the
boat with the motor attached, it is
recommended that the motor remain
in the normal run position.
Use a motor support bar (refer to your
motor support bar manufacturer's
instructions) to stop the motor's side-
to-side movement.
If there is insufficient road clearance
with the motor in the normal run
position, then trailer the motor in the
tilted position using a motor support
bar (refer to your motor support bar
manufacturer's instructions) or
remove the motor from the boat.
81