Spark Plugs - Honda Outboard Motor BFl15A Owner's Manual

Honda power equipment outboard motor owner's manual
Table of Contents

Advertisement

10. MAINTENANCE
Spark Plugs
To ensure proper engine operation, the
spark plugs must be properly gapped
and free of deposits.
Check-replace interval:
After the first 20 hours or I month then
every 200 hours or 1 year (Refer to the
maintenance schedule page 91).
Recommended spark plug:
ZFR7F (NGK),
KJ22CR-L8 (DENSO)
Use
only the recommended spark
plugs or equivalent.
-1
Spark plugs which have
an improper heat range may cause
engine damage.
I. Allow the engine to cool. The spark
plugs will be hot if the engine has
been running.
2. Remove the engine cover.
17
mm WRENCH
WRENCH
3. Disconnect the spark plug caps
from the spark plugs.
4. Use the spark plug wrench and I7
mm wrench supplied in the tool
kit to remove the spark plugs.
5. Check the spark plugs. Replace the
spark plugs if there is apparent
wear, or if the insulators are
cracked
or
chipped. Clean the spark
plugs with a wire brush if they are
to be reused.
0.028-0.031
in
(0.7-0.8
mm)
6. Measure the plug gaps with a spark
plug gap gauge.
The gaps should be 0.028-0.03 I in
(0.7-0.8 mm). Correct as necessary
by carefully bending the side elec-
trode.
99

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Outboard motor bfl30aBf115aBf130a

Table of Contents