1-6. Removal/Installation of Cabinet
1-6. Removal/Installation of Cabinet
m
. Be sure to turn off the power, then pull out the power cord and/or battery before performing the follow-
ing procedure. If not, damage to internal circuit may result.
. The standard tightening torques of main screws used in this unit are as follows:
M1.4 (+) screw
M2 (+), M3 (+) and hexagon screws : 19x10
Rib of the front lid
Screws
Hook section of the outside panel
Screws
Tightening torque: 80 x 10
-2
1-12
: 9x10
-2
N.m (0.9 kgf.cm)
-2
N.m (1.9 kgf.cm)
Front lid
Outside
panel
Hinge
CN30
N.m (8.1 kgf.cm)
Screws
Inside
panel
Protection cover
CN27
CN102
Flexible card wires
Hinge
TC-80 board
CN101
Inside panel
Screws
DNW-7/90/90WS