Sony DNW-7 Maintenance Manual page 48

3-1. Setup Menu
Viewfinder screen (Factory default setting)
* SHOT DATA DISP. *
DATE : OFF
TIME : OFF
MODEL NAME : OFF
SERIAL NO. : OFF
CASSETTE NO. : OFF
SHOT NO. : OFF
ID SELECT : OFF
*** SHUTTER SPEED ***
EVS : ON
CLS : ON
1/100 (for NTSC) : ON
or 1/60 (for PAL)
1/125 : ON
1/250 : ON
1/500 : ON
1/1000 : ON
1/2000 : ON
*** ! LED ***
MASTER GAIN : ON
SHUTTER : ON
WHITE PRESET : OFF
ATW RUN : OFF
EXTENDER ON : ON
FILTER 2,3,4 : OFF
A. IRIS OVERRIDE : OFF
*** SETUP CARD ***
READ ( CAM)
WRITE ( CARD)
ID EDIT
WRITE PROTECT
3-4
Description
Sets the contents of the shot data to be recorded on tape
........... Sets whether to display/record the date. (ON/OFF only)
........... Sets whether to display/record the time. (ON/OFF only)
........... Sets whether to display/record the model name (ON/OFF only)
........... Sets whether to display/record the serial No. (ON/OFF only)
........... Sets whether to display/record the cassette No.. (ON/OFF only)
........... Sets whether to display/record the shot No.. (ON/OFF only)
........... Sets whether the any specific shot ID displays/records. (OFF/ID1/ID2/ID3/ID4)
Sets the shutter speed/mode selection range.
........... Enhanced Vertical Definition mode (DNW-7 only)
Super Enhanced Vertical Definition mode (DNW-90/90WS only)
........... CLS : Clear scan mode
ECS : Extended clear scan mode (DNW-90/90WS only)
........... Shutter speed 1/100 (for NTSC) or 1/60 (for PAL) second in the standard mode
........... Shutter speed 1/125 second in the standard mode
........... Shutter speed 1/250 second in the standard mode
........... Shutter speed 1/500 second in the standard mode
........... Shutter speed 1/1000 second in the standard mode
........... Shutter speed 1/2000 second in the standard mode
........... Sets whether to light the ! indicator LED on the viewfinder when the gain is set
except 0 dB.
........... Sets whether to light the ! indicator LED on the viewfinder when the SHUTTER
selector switch is set to ON.
........... Sets whether to light the ! indicator LED on the viewfinder when the white
balance memory is set to PRESET.
........... Sets whether to light the ! indicator LED on the viewfinder when the ATW
(automatic homing white balance) is operating.
........... Sets whether to light the ! indicator LED on the viewfinder when the lens
extender is used.
........... Sets whether to light the ! indicator LED on the viewfinder when the FILTER
selector is set except 1. (Standard setting is 1.)
........... Sets whether to light the ! indicator LED on the viewfinder when the reference
value of the automatic iris adjustment is set to any value other than the
standard value.
........... Reads data from the setup card.
........... Writes data to the setup card.
........... Sets ID of the setup card.
........... Sets the WRITE PROTECT function of the setup card . (ENG mode only)
DNW-7/90/90WS