Sony DNW-7 Maintenance Manual page 56

3-1. Setup Menu
Viewfinder screen (Factory default setting)
* B-SHAD._R *
H SAW : 0
H PARA : 0
V SAW : 0
V PARA : 0
SHAD COMP : ON
TEST OUT : ENC
* B-SHAD._B *
H SAW : 0
H PARA : 0
V SAW : 0
V PARA : 0
SHAD : ON
TEST OUT : ENC
* DCC ADJ. *
D RANGE : 6
POINT : 0
GAIN : 0
3-12
Description
........... Sets the manual black shading correction amount of R signal.
........... Sets whether to activate the shading correction on R signal.
........... Sets the type of the video signal output from the TEST OUT connector.
n
Same as TEST OUT item of the "FUNCTION 1/2" page.
........... Sets the manual black shading correction amount of B signal.
........... Sets whether to activate the shading correction on B signal.
........... Sets the type of the video signal output from the TEST OUT connector.
n
Same as TEST OUT item of the "FUNCTION 1/2" page.
........... Sets the dynamic range during dynamic contrast control.
(0 : approximately 300 %, 6 : approximately 600 %)
........... Sets the minimum knee point during dynamic contrast control.
........... Sets the knee slope value during dynamic contrast control.
DNW-7/90/90WS