Replacing the USB board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw hole on the USB board with the screw hole on the computer base.
2
Replace the screw that secures the USB board to the computer base.
3
Connect the USB-board cable to the connector on the USB board.
4
Follow step 5 to step 8 in "Replacing the Hard Drive" on page 25.
Postrequisites
1
Replace the computer base. See "Replacing the Computer Base" on page 20.
2
Replace the base cover. See "Replacing the Base Cover" on page 17.
Replacing the USB board
27
|