Removing the Wireless Mini-Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 15.
2
Remove the computer base. See "Removing the Computer Base" on page 18.
Procedure
1
Disconnect the antenna cables from the wireless mini-card.
2
Remove the screws that secure the wireless mini-card to the system board.
1
screws (2)
3
wireless mini-card
3
Slide and remove the wireless mini-card from the mini-card connector.
1
2
Removing the Wireless Mini-Card
4
3
2
antenna cables (2)
4
mini-card connector
35
|