System Setup; Entering System Setup - Dell Inspiron 2350 Owner's Manual

System Setup

Use the system setup to utility to:
•
Get information about the hardware installed on your computer, such as the
amount of RAM, the size of the hard drive, and so on.
•
Change the system configuration information.
•
Set or change a user-selectable option, such as the user password, type of
hard drive installed, enabling or disabling base devices, and so on.
CAUTION: Changing the settings in System Setup may result in incorrect
configuration that can cause your computer to work incorrectly or damage
your computer.
NOTE: It is recommended that you note the settings in System Setup before you
make any changes.

Entering System Setup

1 Turn on (or restart) your computer.
2 When the DELL logo is displayed, wait for the F2 prompt to appear and then
press <F2> immediately.
NOTE: If you wait too long and the operating system logo appears, continue to
wait until you see the Microsoft Windows desktop. Then shut down your
computer and try again.
System Setup
63
|