Removing the Speakers
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 15.
2
Remove the computer base. See "Removing the Computer Base" on page 18.
Procedure
1
Disconnect the speaker cable from the system board.
2
Note of the speaker-cable routing and remove the cable from the
routing guides.
3
Remove the screws that secure the speakers to the computer base.
4
Lift the speakers, along with the cable, off the computer base.
1
1
speaker cable
3
screws (4)
28
|
Removing the Speakers
2
speakers (2)
3
2