Replacing The Power-Button Assembly; Procedure; Postrequisites - Dell Inspiron 2350 Owner's Manual

Replacing the Power-Button Assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Place the power button in the display bezel and make sure that the power button
fits in the slot on the display bezel.
2 Adhere the Mylar over the power button.
3 Route the power-button cable through the routing guides.
4
Connect the power-button cable to the control-buttons board cable.
5 Replace the screw that secures the power button to the display bracket.

Postrequisites

1 Replace the back cover. See "Replacing the Back Cover" on page 44.
2
Replace the computer base. See "Replacing the Computer Base" on page 20.
3 Replace the base cover. See "Replacing the Base Cover" on page 17.
52
| Replacing the Power-Button Assembly