Dell PowerEdge C6220 II Hardware Owner's Manual page 138

Token Setup option
48A9 IPv6 AutoConfig Enables IPv6 auto configuration.
48AA Serial Port Mode Console Redirection baud rate will be set to 3,8400 bits
48AB Flow Control
48AC Flow Control
48AD Flow Control
48AE Terminal Type
VT-UTF8
Combo Key
48AF
Support
VT-UTF8
Combo Key
48B0
Support
48B1 Event logging
48B2 Event logging
48B3 NMI on Error
48B4 NMI on Error
Memory
48B5
Operating
Voltage
48C0 Frequency Ratio
48C1 Frequency Ratio
48C2 Frequency Ratio
48C3 Frequency Ratio
48C8 QPI Frequency
138 | Using the System Setup Program
Description
per second.
Remote access flow controls by none.
Remote access flow controls by hardware.
Remote access flow controls by software.
The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh, C0h,
and D7h.
Disables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
Enables VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
Disables BIOS to log system events to BMC, errors
include ECC/PCI/PCI-E/HT...etc.
Enables BIOS to log system events to BMC, errors include
ECC/PCI/PCI-E/HT...etc.
Disables BIOS to generate NMI when PCI-E
uncorrectable errors occur.
Enables BIOS to generate NMI when PCI-E uncorrectable
errors occur.
Indicates all DIMMs in the system are operating at 1.25
volts.
Sets frequency multiplier as maximum level.
Downgrades frequency multiplier one level.
Downgrades frequency multiplier two levels.
Downgrades frequency multiplier three levels.
Sets the QPI frequency runs at maximum speed.