Dell PowerEdge C6220 II Hardware Owner's Manual page 124

Token Setup option
I/OAT DMA
01CF
Engine
I/OAT DMA
01D0
Engine
01DA Embedded NIC1 Enables NIC1 with iSCSI Remote Boot.
01DB Embedded NIC2 Enables NIC2 with iSCSI Remote Boot.
01EA Turbo Mode
01EB Turbo Mode
01F0 Embedded NIC3 Disables the system's third embedded network interface
Embedded NIC3 Enables the system's third embedded network interface
01F1
Embedded NIC3 Enables the system's third embedded network interface
01F2
01F3 Embedded NIC3 Enables NIC3 with iSCSI Remote Boot.
VT for Direct I/O Disables Intel Virtualization Technology for Direct I/O
0204
VT for Direct I/O Enables Intel Virtualization Technology for Direct I/O
0205
Internal USB
0211
PORT
Internal USB
0212
PORT
Maximum
021F
Performance
0221 OS Control
124 | Using the System Setup Program
Description
Enables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be enabled only if the
hardware and software support I/OAT.
Disables the I/O Acceleration Technology (I/OAT) DMA
Engine option. This feature should be disabled only if the
hardware and software support I/OAT.
Disables Intel's processor allows the processor core to
increase its frequency.
Enables Intel's processor allows the processor core to
increase its frequency.
controller.
controller, but don't enable the NIC's associated PXE or
RPL boot-ROM.
controller (full-function), including its PXE boot-ROM.
(VT-d) that enhances I/O support (DMA) when running a
Virtual Machine Monitor.
(VT-d) that enhances I/O support (DMA) when running
a Virtual Machine Monitor.
This field disables the internal USB port.
This field enables the internal USB port.
This will set the Maximum Performance mode in the
system.
Allows OS to change the P-state.