Power And System Board Indicator Codes - Dell PowerEdge C6220 II Hardware Owner's Manual

Power and System Board Indicator Codes

The LEDs on the system front panel and back panel display status codes
during system startup. For location of the LEDs on the front panel, see
Figure 1-1 for 3.5" hard drive and Figure 1-4 for 2.5" hard drive systems. For
location of the LEDs on the back panel, see Figure 1-14 and Figure 1-15.
Table 1-3 lists the status associated with the status codes.
Table 1-3. Status Indicator Codes
Component
Power-on
indicator
(A bi-color LED
on power button)
System
identification
indicator
30 | About Your System
Indicator
Green Solid
Amber Off
Green Off
Amber Blinking
Green Off
Amber Blinking
Steady Blue
Blinking Blue
Off
Condition
Power On (S0)
BMC critical condition event in Power
Off mode (S4/S5)
BMC critical condition event in Power
On mode (S0)
IPMI via Chassis Identify Command On
or ID Button Press ID On
Only IPMI via Chassis Identify
Command Blink On
IPMI via Chassis Identify Command Off
or ID Button Press ID Off