Power Trim/Tilt Switch - Honda Outboard Motor BF115A Owner's Manual

3. CONTROLS (TOP-MOUNT TYPE)
Power Trim/Tilt Switch
(remote control lever)
Power Tkim
Press the power trim/tilt switch on the
remote control lever to adjust the
motor trim angle from 0' to 20' to main-
tain proper boat trim. The power
trim/tilt switch located on the remote
control lever can be operated while the
boat is under way or while stopped.
By using the power trim/tilt switch, the
operator can change the trim angle of
the motor to achieve maximum boat
acceleration, speed, stability and
maintain optimum fuel consumption.
Power Tilt
Press the power trim/tilt switch on the
remote control lever to adjust the
motor tilt angle from 20' to 72'.
By using the power trim/tilt switch, the
operator can change the tilt angle of
the motor for shallow water operation,
beaching, launching from a trailer, or
mooring.
0"
TRIM
ANGLE.
Excessive trir&ilt angle during
operation can cause the propeller
to raise out
of
the water and
cause
propeller ventilation and engine
over-revving. Excessive trim/tilt
angle can also damage the water
pump.
SINGLE TYPE
POWER TRIM/TILT SWITCH
DUAL TYPE
POWER TRIM/TILT SWITCH
WEI-3
(RIGHT)
LEVER
31