Honda Outboard Motor BF115A Owner's Manual page 112

10. MAINTENANCE
ACG FUSE
"90A" MARK
FUSE CASE LID
h
USE
FUSE (90A)
Disconnect the battery cable at the
battery negative (-) terminal before
replacing the fuse.
Failure to do so may cause A short
circuit.
Replacement
1. Stop the engine.
2. Remove the engine cover.
3. Remove the fuse case lid.
4. Remove the old fuse by removing two
5 mm screws.
5. Install a new fuse with the "90A" mark
downward.
6. After finishing replacement, install the
fuse case lid with its hook toward the
engine side.
7. Be sure to check the fuse case lid is
securely locked.
A spare fuse is located on the reverse side
of the fuse case lid and tightened with two
3 mm screws.
When the new fuse is set as a spare fuse
on the reverse side of the fuse case lid, set
the fuse so that you can see the "90A"
mark on it.
110