How To... REMOVE AND REPLACE THE MOTOR CONTROLLER
Tools Required: Standard screwdriver, socket and ratchet set
Step 1
Turn the power OFF at the ON/OFF switch and then unplug the unit from the electrical outlet.
Step 2
With the help of another person, slowly tilt the unit on its left side.
Step 3
Ground yourself to the machine. Connect a disposable grounding strap to the ANTI-STATIC CORD BRACKET.
Step 4
With a socket and ratchet wrench, loosen and remove the seven SCREWS securing the faulty MOTOR
CONTROLLER in place.
Step 5
Disconnect the four CONNECTORS from the malfunctioning MOTOR CONTROLLER and remove it from the
machine.
Step 6
Place the new MOTOR CONTROLLER in its place and reconnect the three CONNECTORS.
Step 7
Reverse Steps 1 through 4 to return all parts to their proper positions.
32