Life Fitness 9500 Series Service Manual page 56

Life Fitness Model 9500 Series HR and Telemetry Equipped Treadmills
How To... REMOVE AND REPLACE THE WAX CONTAINER (Continued)
NOTE: THE NEW WAX CONTAINER DOES NOT REQUIRE THE TWO BRACKETS. DISCARD AND
USE THE TWO WASHERS.
Step 8
Align the two WASHERS with the holes in the new WAX CONTAINER and insert the two BOLTS through both
items. Secure the two items to the TRAY with the two NUTS and tighten them with the two 7/16" wrenches.
Step 9
Place the COVER over the new WAX CONTAINER and position the entire assembly in the treadmill FRAME.
Reinstall the four MOUNTING BOLTS and tighten them with the 7/16" wrench.
Step 10
Connect the new WAX CONTAINER HOSE to the BARBED-FITTING and press the HOSE CLAMP tightly over the
connection.
NOTE: THIS IS NORMALLY AN OPPORTUNE TIME TO INSPECT THE WAX SPRAY NOZZLE.
PRESS THE SPRAY NOZZLE IN AND TWIST IT 1/4 TURN TO REMOVE. CLEAN WITH WARM WATER OR
REPLACE THE SPRAY NOZZLE AS DEEMED NECESSARY.
Step 11
Reverse Steps 1 through 3 to return all parts to their proper positions.
23