Life Fitness 9500 Series Service Manual page 27

Life Fitness Model 9500 Series HR and Telemetry Equipped Treadmills
DIAGNOSTIC TESTS
How To...EXECUTE THE INCLINE CONTROL TEST
This test indicates if the unit is reaching or lowering to the user's chosen level.
TO ENTER INTO THE INCLINE CONTROL TEST TURN "ON" THE HILL PROGRAM KEY.
The information that will be displayed in this mode is as follows:
± How long lift action has been on in minutes. Displayed in TIME window.
± Lift position counts displayed in INSTRUCTIONS window.
± Speed encoder count displayed in CALORIES window.
± Target incline indicated in SPEED window.
± Actual incline indicated in INCLINE window.
Tests in the Incline Control Diagnostics are as follows:
1. Press INCLINE keys to target incline.
2. Press the SPEED or NUMBER keys to enter a target speed.
3. Press the ENTER or " 0 " key to stop the striding belt.
4. Press CLEAR to exit the Diagnostic Program or press Program Keys to enter another
Diagnostic/Accounting function.
4
NOTE: INCLINE NUMBERS SHOULD BE EQUAL.