Dell PowerEdge VRTX Owner's Manual page 100

11. Remove the double-wide GPGPU card from the expansion-card connector on the riser, and slide it out of the
double-wide PCIe cage.
Figure 67. Removing and Installing a Double-Wide GPGPU Card
1. tab on the double-wide PCIe cage
3. double-wide GPGPU card
12. Replace the double-wide GPGPU card and install the double-wide PCIe cage, if applicable. See
Cage.
NOTE: If you are not installing a double-wide GPGPU card, install the single-wide PCIe cage in the enclosure.
See Installing The PCIe
13. If applicable, install the expansion card(s). See
14. Close the PCIe cage door.
15. Close the system.
16. If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.
17. If removed, reinstall the hard drives, server modules, and power supplies.
18. Reconnect the enclosure to its electrical outlet and turn the enclosure on, including any attached peripherals.
19. Turn on the server modules using the operating system commands or the CMC.
20. If applicable, install the front bezel.
100
Cage.
Installing A Full Height Expansion
2. double-wide GPGPU card bracket
4. double-wide PCIe cage
Card.
Installing The PCIe