Remove the screws securing the system feet to the system base cover.
Figure 26. Removing and Installing the System Feet
system feet (4)
screw holes (4)
Installing The System Feet
Align the screw holes on the system feet with the screw holes on the system base cover.
Install the screws to secure the system feet to the system base cover.
Place the enclosure upright on a flat, stable surface and rotate the system feet outward.
If removed, reinstall the hard drives, server modules, power supplies, and front bezel.
Wheel Assembly (Optional)—Tower Mode
The wheel assembly provides mobility to the system in the tower mode.
The wheel assembly consists of the following:
Wheel assembly units (front and back)
Power cable retention bracket
Installing The Wheel Assembly
WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the
system by yourself.
CAUTION: Rolling the system on its wheels can cause vibrations that can damage the system.
system base cover